Menswear sizes
→Tops
→Bottoms
→Corresponding Size
Finished dimensions of Tops
The finished dimensions shown in the product details pages were measured and calculated as follows.
A – Length
T-Shirts & Sweatshirts: The length obtained by measuring the longest vertical part of the body.
Shirt: The length obtained by measuring from the middle of the back of the garment to the hem (from underneath the collar if there is a collar).
B – Shawl (T-Shirts & Sweatshirts)
The length obtained by measuring the distance between the tips of the shoulders.
C – Chest
The length obtained by measuring the width (C) of the lower part of the garment and doubling it (including the tack if there is a tack in the back).
D – Chest
The length obtained by measuring the width (D) of the narrowest part of the body of the garment and doubling it.
E – Hem circumference
The length obtained by measuring the width (E) of a straight line connecting the bottom part of the garment from left to right, and doubling it.
F – Sleeve Length
The length obtained by measuring from shoulder to cuff.
A – Length
T-Shirts & Sweatshirts: The length obtained by measuring the longest vertical part of the body.
Shirt: The length obtained by measuring from the middle of the back of the garment to the hem (from underneath the collar if there is a collar).
B – Shawl (T-Shirts & Sweatshirts)
The length obtained by measuring the distance between the tips of the shoulders.
C – Chest
The length obtained by measuring the width (C) of the lower part of the garment and doubling it (including the tack if there is a tack in the back).
D – Chest
The length obtained by measuring the width (D) of the narrowest part of the body of the garment and doubling it.
E – Hem circumference
The length obtained by measuring the width (E) of a straight line connecting the bottom part of the garment from left to right, and doubling it.
F – Sleeve Length
The length obtained by measuring from shoulder to cuff.
G – Neck
Measure from the point where the button is sewn to the middle of the button hole.
When measuring your own neck size, the standard is the size obtained by measuring round the neck 1cm below the Adam’s apple, and adding 2cm+.
H – Sleeve Length
Measure a straight line from the middle of the back of the neck to the cuff.
When measuring your own sleeve length, keep the arm naturally extended, then measure from the middle of the nape of the neck through a point at the tip of the shoulder and on, following the roundness of the body, to the protruding part of the wrist bone. The standard for shirt sleeve length is the actual measurement plus 2cm.
Finished dimensions of bottoms
The finished dimensions shown in the product details pages were measured and calculated as follows.
※The method of measuring may differ somewhat depending on the type of bottoms
A – Finished dimensions (shown as ‘waist’ in the product details pages)
The length obtained by dividing the garment vertically, measuring width (A) taken with the waistband folded left and right, and then doubling it.
B – Hips
The length obtained by measuring, then quadrupling, width (B), taken by using the point of intersection of the seams at the bottom of the fly as a reference point then extending out parallel to the belt to the creases in both legs of the pants.
C –
The length obtained by using the point of intersection of the seams at the bottom of the fly as a reference point and measuring from the middle of the waistband down to the thigh (see below).
D – Inseam
The length obtained when the garment is laid flat, and measured along the inner seam from the intersection of the crotch seams to the foot.
E – Thigh
The length obtained by measuring the width of the crotch area with the crotch stretched so that the intersection of the crotch seams lays flat.
F – Hem
The length obtained by measuring the width of the foot part.
G – Waist unclothed dimensions (shown as ‘size’ in the product details pages)
The size obtained by measuring the narrowest part of the customer’s waist.
A – Finished dimensions (shown as ‘waist’ in the product details pages)
The length obtained by dividing the garment vertically, measuring width (A) taken with the waistband folded left and right, and then doubling it.
B – Hips
The length obtained by measuring, then quadrupling, width (B), taken by using the point of intersection of the seams at the bottom of the fly as a reference point then extending out parallel to the belt to the creases in both legs of the pants.
C – Front rise
The length obtained by using the point of intersection of the seams at the bottom of the fly as a reference point and measuring from the middle of the waistband down to the thigh (see below).
D – Inseam
The length obtained when the garment is laid flat, and measured along the inner seam from the intersection of the crotch seams to the foot.
E – Thigh
The length obtained by measuring the width of the crotch area with the crotch stretched so that the intersection of the crotch seams lays flat.
F – Hem
The length obtained by measuring the width of the foot part.
G – Waist unclothed dimensions (shown as ‘size’ in the product details pages)
The size obtained by measuring the narrowest part of the customer’s waist.
Corresponding Size
The sizes of MUJI clothing are given as unclothed measurements.
Unclothed measurement refers to the size of the body in an unclothed state. These are standard sizes based on your knowledge of the range (height, chest, waist etc.) of your own body type and the size which suits that body type.
The finished dimensions shown in the product details pages were measured and calculated as follows.
※The method of measuring may differ somewhat depending on the type of bottoms
A – Chest
Measure in such a way that the tape measure passes horizontally from under the armpit across the shoulder blade.
B – Waist
Measure the narrowest part of the waist.
C – Hips
Measure the largest part of the hip when standing up straight.
D – Inseam
Measure the inseam of your existing pants. Measure from the crotch seam along the inside seam to the foot.
E – Height
Without shoes, measure from the top of the head to the heel.
The criteria for gentlemen’s sizes are height, chest, and waist.
A – Chest
Measure in such a way that the tape measure passes horizontally from under the armpit across the shoulder blade. For bust, measure the most fleshed out part of the chest.
B – Waist
Measure the narrowest part of the waist.
C – Hips
Measure the largest part of the hip when standing up straight.
D – Inseam
Measure the inseam of your existing pants. Measure from the crotch seam along the inside seam to the foot.
E – Height
Without shoes, measure from the top of the head to the heel.
The criteria for gentlemen’s sizes are height, chest, and waist.
Corresponding Size
Autumn & Winter Clothing
Sizes
XS
S
M
L
XL
XXL
Height
158 – 166cm
162 – 170cm
166 – 174cm
170 – 178cm
174 – 182cm
178 – 186cm
Chest
80 – 88cm
84 – 92cm
88 – 96cm
94 – 102cm
100 – 108cm
106 – 116cm
Waist
72 – 76cm
76 – 80cm
80 – 85cm
86 – 91cm
82 – 97cm
98 – 103cm
Hips
90 – 96cm
93 – 99cm
96 – 102cm
99 – 105cm
102 – 108cm
105 – 111cm
Spring & Summer Clothing
Sizes
XS
S
M
L
XL
XXL
Height
155 – 165cm
165 – 175cm
175 – 185cm
Chest
76 – 84cm
80 – 88cm
88 – 96cm
94 – 104cm
104 – 112cm
112 – 120cm
Waist
64 – 72cm
68 – 76cm
76 – 84cm
84 – 92cm
92 – 100cm
100 – 108cm
Hips
75 – 85cm
82 – 90cm
90 – 98cm
98 – 106cm
106 – 114cm
114 – 122cm
Bottoms
Sizes
28
29
30
31
32
33
34
35
Waist
71cm
73.5cm
76cm
78.5cm
81cm
83.5cm
86cm
88.5cm
MUJILabo
Sizes
Labo
XXS – XS
S – M
L – XL
Height
155 – 165cm
165 – 175cm
175 – 185cm
Chest
72 – 80cm
76 – 84cm
80 – 88cm
88 – 96cm
94 – 102cm
104 – 112cm
112 – 120cm
Waist
60 – 68cm
64 – 72cm
68 – 76cm
76 – 84cm
84 – 92cm
92 – 100cm
100 – 108cm
Hips
74 – 82cm
78 – 86cm
82 – 90cm
90 – 98cm
98 – 106cm
106 – 114cm
114 – 122cm
2023-09-11 08:03:52
#MUJI
