Basketball comeback
Basketball comeback
Key Code: 42970521 Warning CHOKING HAZARD, small parts. Not suitable for children under three years of age. Requires adult assembly. Component content
Plastic plate A x 4pc
Plastic ring B x 1 piece
Screw B1 x 6pc
Belt C x 3 pieces
Long bracket D x 3 pieces
Short bracket E x 3 pieces
Screw F x 2 pieces
Protective cover G x 2pc
Assembly instructions
Step 1. Gather 2 plastic plates (Part A) together, then secure them together. Repeat with the other 2 plastic plates.
Step 2. Join the 2 sets of plates and secure in position according to the diagram.
Step 3. Connect the long and short bracket (Part D and E) together and secure them in the plastic ring (Part B).
Step 4. Connect the two parts from step 2 and 3 together in three positions, then secure with screws (Part B1).
Step 5. Screw the 2 screws (Part F) into the holes in the center from the bottom, then cover the screw with the protection cover (Part G). Note: Keep the protective covers on the top after mounting.
Step 6. Tie the 3 belts (Part C) on the ring through the hole, then the product is ready to use.
FOR AU / NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China
