The halberd uses a one-piece knit upper, Li Ning’s knit upper technology is still very cowhide, there is no problem with the strength. Coupled with the reinforcement of the film on the outside of the vamp, the vamp support of the halberd is at a good level, and the foot will not eat the vamp when it is side kicked and when it stops suddenly.
Upper wrapping: poor
It is written on the insole that the ship’s new last shape is used, so this last shape is widened again? My feet can slide left and right inside the shoe, and there seems to be a problem with the design of the halberd’s shoelace system, no matter what kind of tie The method can’t be tightened, and the mysterious design of the butt causes some heels to not follow the foot, so it can be imagined how bad the overall upper wrapping of the halberd is.
Resistance to torsion: good
The combination of super large area tpu+carbon plate gave a satisfactory answer in terms of the anti-torsion of the halberd. However, due to the hardness of the tpu and the carbon plate is a flat carbon plate, the anti-torsion of the halberd did not use the opposite carbon plate The raid 2se of the big sage, the front shadow of the super large-area carbon plate, and the double-density pebax plate are good.
Arch Support: Pass
Everyone should be shocked to see here. Why is the configuration of the anti-torsion system so luxurious and the support can only reach a passing level? I think the beng material should be cooked first. Too soft beng leads to insufficient arch support performance, which is the same as Dasheng’s light foam. At the same time, the longitudinal deformation of the flat carbon plate is more prone to deformation than the special-shaped carbon plate. The last is the overall design of the whole pair of shoes. When you go to the foot, it is obvious that the foot will tilt to the inside, and the arch pressure is greater. Therefore, the arch support of this pair of shoes can only be regarded as a passing category.
Cushioning: extreme
The super thick beng slings the cushioning of all badminton shoes today.
Stability: poor
Even if a halberd embracing tpu is added to the heel, the thickness of the beng is too thick, and there is no external tpu reinforcement to limit the deformation of the beng, and the deformation of the heel is still shocking. High center of gravity + large deformation, the stability of the halberd can be imagined, friends who don’t want to get hurt, please stay away.
Grip: Excellent
Concentric pattern + soft crystal bottom material makes the halberd’s grip performance excellent, stop and go.
to sum up
The halberd is indeed a pair of badminton shoes with an explosive foot feel, but I think it is limited to the foot feel. Many people think that a good foot feel is a good shoe, so I don’t want to say anything about this kind of person. A pair of badminton shoes must first ensure the safety of the players. For a pair of sneakers, foot feel is always just the icing on the cake. Therefore, I only recommend this pair of halberds to heavy golfers who want to experience beng technology and those who have super super super super super invincible confidence in their ankle strength. As a pair of badminton shoes, the halberd is unqualified.
.
