F1 Helmet Makers Detail Safety Tests and Production Process

Formula 1 helmets demand an uncompromising engineering approach, combining advanced composite materials like carbon fibre to ensure high strength while keeping the overall weight low enough to reduce strain on a driver’s neck, according to the BBC.

Manufacturing requires precision across every component. Modern F1 helmets must endure a 225g metal projectile fired at 155mph. They face a 790C flame and rigorous impact tests.

The FIA works closely with manufacturers like Schuberth on safety standards. “There's a constant exchange of information. We are repeating tests on a regular basis. We are also working on the future regulation of the helmets.” Dall'Oglio said.

Maintaining strict quality control means that any structural defect results in the carbon shell being discarded. According to the BBC, this rejects over 1,000 euros in material and all preceding hours of work. Schuberth operates alongside Arai, Bell, and Stilo as leading makers in the sport.

Approved carbon shells move to a water-jet cutting system. The setup uses a needle of water at 4,000 bars of pressure to create the narrow visor opening, which measures six centimetres at its highest point.

Dall’Oglio explained that this method avoids applying mechanical force directly to the helmet. The shell then reaches the assembly area, referred to internally as the jigsaw.

An outer shell consists of nearly 100 pieces. Workers add another hundred components depending on the required aerodynamic parts, bringing the total to a couple of hundred pieces per helmet. Completed shells go directly to the driver’s designer for custom liveries.

Liveries often celebrate a driver’s heritage, family, or defining moments. Intricate paintwork adds extra weight. A standard helmet weighs about 1.4 kg depending on decorations and aerodynamic specifications.

Schuberth GmbH, the German helmet manufacturer supplying Verstappen, Hülkenberg, Hadjar and Tsunoda this season, was founded in 1922 in Braunschweig and now operates from Magdeburg with about 300 employees producing 1.5 million helmets annually.

The company entered Formula One in 2000 with the QF1 model worn by Nick Heidfeld, developed after Michael Schumacher’s 1999 British Grand Prix accident; it was lighter than rivals and featured air filtration, later evolving into today’s RF1. Schuberth also equips NASCAR drivers Danica Patrick and Jimmie Johnson and supplies ballistic and firefighting helmets.

Dall’Oglio said that the manufacturer tries to remove 20 or 30 grams from top-of-the-line shells. Drivers then add 70 to 80 grams of decoration through their painters.

Newsroom

Newsroom at Archysport.